Images are representations only.

710FSS / 710FSM Solenoid Valve, SS (PTFE), Flanged

Brand: Morrison Bros. Co.
Request a Quote
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level.

Generally installed on the dispensing side of a fuel system pipeline.

The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.

NOTE: Product can only be pumped in one direction, the direction of the flow arrow. Not designed for use as an overfill prevention or process control valve.
Features
  • Normally closed, hung piston design
  • Install in a horizontal pipeline in the upright vertical position
  • Zero pressure differential
  • Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow
  • Continuous duty Class H standard coil operates at 120 volts
  • Several optional coil voltages available
  • Enclosure is watertight and rated for hazardous locations - NEMA 3, 4X, 7 and 9; groups C and D
  • 710FSM has manual override feature. Available in sizes ranging from 3/4″ to 2″ for operation during a power outage
  • Recommended for use with liquids having a maximum viscosity of 60 centistokes
  • A strainer with a 100 mesh screen is recommended at the valve inlet
show more
Normally closed solenoid valves are used to help prevent the accidental siphoning of a product from a tank in the event of a leak downstream below the liquid level.

Generally installed on the dispensing side of a fuel system pipeline.

The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.

NOTE: Product can only be pumped in one direction, the direction of the flow arrow. Not designed for use as an overfill prevention or process control valve.
Features
  • Normally closed, hung piston design
  • Install in a horizontal pipeline in the upright vertical position
  • Zero pressure differential
  • Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow
  • Continuous duty Class H standard coil operates at 120 volts
  • Several optional coil voltages available
  • Enclosure is watertight and rated for hazardous locations - NEMA 3, 4X, 7 and 9; groups C and D
  • 710FSM has manual override feature. Available in sizes ranging from 3/4″ to 2″ for operation during a power outage
  • Recommended for use with liquids having a maximum viscosity of 60 centistokes
  • A strainer with a 100 mesh screen is recommended at the valve inlet
Close

Specifications

Brand

Certifications & Approvals

  • CSA

Body Material

  • 304 Stainless Steel

Seal Material

  • PTFE

Environmental Protection

  • NEMA 3, 4X, 7 and 9

Voltage

  • 120 Vac (24, 208, 220, 240, & 480 Vac, and 12, 24, and 48 Vdc available)

Operating Temperature

  • MInimum -40° F

Flange Connection

  • ANSI 150 RF
  • -1/2", 2", 3"

Orifice Size

  • 1.25", 1.5", 3.0"
Close

Applications

  • Storage Tank 
Close